Bartec Auto ID TECH300 - 2;6 Programmable Sensor

T e c h 3 0 0 User Guide R.59.1 2020
10 | P a g e
Valve Condition
Press enter at the particular wheel position to select the Valve condition.
Successful Sensor Read
When all four wheels have been read, the tool will automatically save all Data and come up
with the following three options.
Send
Sends the data to the Service Centre via Bluetooth.
Print
Sends the data immediately to the Bluetooth printer that will print
out the report.
Continue
Will let you exit the menu to continue with further steps
2/6 PROGRAMMABLE SENSOR
The “Programmable Sensor” Point on the service menu enables the function of programming
aftermarket replacement sensors like the Alligator sens.it or the Schrader EZ-sensor. Even
when they are already mounted in a wheel or programmed to another vehicle.
The user can choose from a selection of sensors which match the preselected MMY.
Valve Condition
Sensor OK
Corroded Stem
1/2
Enter for valve condition
Press Test To Activate
03/2014>12/2018 C Class
Check Sensor
Programmable Sensor
Relearn
OBD Diagnostics
Technical Information
Review Vehicle Data
2/6
Universal Sensors
Schrader EZ-sensor
Huf intelliSens UVS
Huf IntrlliSens ECS
ProSens
UniSens by repstar
Alligator sens.it
1/3
Select Sensor Type
EZ-sensor Clamp-in 2020
EZ-sensor Snap-in 1000
EZ-sensor 2.0 Clamp-in 2210
EZ-sensor 2.0 Snap-in 1210
EZ-sensor 2.0 Clamp-in 2200
EZ-sensor Clamp-in 2020
Copy/Clone Set
Create ID
Copy/Clone ID
Enter ID Manually
Copy Using stored data