Barton Instrument Systems, LLC
900 S. Turnbull Canyon Rd.
City of Industry, CA 91745 USA
(626) 961-2547
On the Web at www.barton-instruments.com
©Copyright 2003, Barton Instrument Systems, LLC. All rights reserved.
Product Warranty
A. Warranty
Barton Instrument Systems, L.L.C. warrants that at the time of shipment the products manufac-
tured by Barton Instrument Systems, L.L.C. and sold hereunder will be free from defects In
material and workmanship, and will conform to the specications furnished by or approved by
Barton Instrument Systems, L.L.C..
B. Warranty Adjustment
(1) If any defect within this warranty appears, Buyer shall notify Barton Instrument Systems,
L.L.C. immediately.
(2) Barton Instrument Systems, L.L.C. agrees to repair or furnish a replacement for, but
not install, any product which within one (1) year from the date of shipment by Barton
Instrument Systems, L.L.C. shall, upon test and examination by Barton Instrument Systems,
L.L.C., prove defective within the above warranty.
(3) No product will be accepted for return or replacement without the written authorization
of Barton Instrument Systems, L.L.C.. Upon such authorization, and in accordance with
instructions by Barton Instrument Systems, L.L.C., the product will be returned shipping
charges prepaid by Buyer. Replacements made under this warranty will be shipped prepaid.
C. Exclusions from Warranty
(1) THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER EXPRESSED
OR IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE, OR OTHERWISE.
(2) Components manufactured by any supplier other than Barton Instrument Systems, L.L.C. shall
bear only the warranty made by the manufacturer of that product, and Barton Instrument
Systems, L.L.C. assumes no responsibility for the performance or reliability of the unit as a
whole.
(3) "In no event shall Barton Instrument Systems, L.L.C. be liable for indirect, incidental, or
consequential damages nor shall the liability of Barton Instrument Systems, L.L.C. arising in
connection with any products sold hereunder (whether such liability arises from a claim based
on contract, warranty, tort, or otherwise) exceed the actual amount paid by Buyer to Barton
Instrument Systems, L.L.C. for the products delivered hereunder."
(4) The warranty does not extend to any product manufactured by Barton Instrument Systems,
L.L.C. which has been subjected to misuse, neglect, accident, improper installation or to use in
violation of instructions furnished by Barton Instrument Systems, L.L.C..
(5) The warranty does not extend to or apply to any unit which has been repaired or altered at any
place other than at Barton Instrument Systems, L.L.C.'s factory or service locations by persons
not expressly approved by Barton Instrument Systems, L.L.C..
Disclaimer
Barton Instrument Systems, LLC makes no warranty of any kind with regard to this manual, materials attached
to or provided with, including, but not limited to, implied warranties of merchantability and tness for a
particular purpose. Barton Instrument Systems, LLC shall not be liable for errors contained in this manual,
including materials attached to, or provided with, or for incidental or consequential damages in connection
with the furnishing, performance, or use of this information. The information contained in this manual (along
with attached or provided materials) is subject to change without notice. The contents of this manual and all
attached/provided materials may be revised without prior notice.
To Previous Page
Loading...
Need help?
General
