Installation and operation
14 / 22 700182G
• After a power failure or when the plug is removed from the socket, do not
reconnect the appliance to power supply for at least 5 minutes.
• If the appliance is switched off for a longer period of time, the cooler door should
remain open.
Before First Use
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section 6 'Cleaning'.
2. To end with, dry the appliance and accessories thoroughly.
3. Place the shelves in the appliance.
4. Close the appliance door.
5. The appliance should be left standing upright for at least 4 hours, before it is
connected to power supply.
6. Then, plug the appliance into a suitable single socket.
7. When started for the first time or after breaks in operation, set the temperature
to '7' position (the lowest temperature setting) for at least 3–4 hours before
putting any bottles into the cooler.
8. Then, you can set a desired temperature.
Control Elements
8. Temperature controller
9. Lighting ON/OFF switch
To Next Page
Loading...