Bartscher 700182G - 6 Cleaning and Maintenance; Safety Instructions for Cleaning

Cleaning and Maintenance
16 / 22 700182G
EN
Shelves
The bottle cooler is equipped with 5 bottle racks, 1 rack and 1 grid.
Bottle racks and the rack are removable.
Bottle racks (2) are fixed at the back of an
internal section of the appliance, using a
snap grove, so that they cannot slide out
when beverage bottles are taken out.
1. To remove the bottle rack, lift it slightly.
The back support in a bottle rack prevents
bottles to contact with rear wall, thus
providing for free air circulation in the
appliance.
Fig. 3
The rack (3) is intended for beverages in
different containers.
The grid (5) in the bottom section of the
appliance prevents horizontally stored
bottles from sliding out of the appliance
when door is open.
Fig. 4
6 Cleaning and Maintenance
6.1 Safety Instructions for Cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.