Possible Malfunctions
18 / 22 700182G
7 Possible Malfunctions
Mögliche
The table below contains descriptions of possible causes and solutions to
malfunctions or errors during operation of the appliance. When malfunction cannot
be removed, contact the technical service.
In such a case, provide article number, model name and serial number. These data
may be found in the rating plate.
Plug improperly inserted
into a socket
Remove the plug and insert
it properly in the socket
Electric power supply safety
fuse damaged
Check the fuse, connect the
appliance to another socket
Check the electric power
supply
Damaged temperature
controller
Contact the service
company
Insufficient cooling
efficiency
Direct sunlight or heat
sources in immediate
vicinity
Move the appliance away
from heat sources
Poor air circulation around
the appliance
Keep sufficient clearance
from walls or other objects
Appliance door is not closed
properly or it has been
opened for too long
Close the appliance door
properly
Limit the door opening time
to minimum
Damaged or deformed door
seal
Contact the service
company
Too little clearance between
objects inside the appliance
or too many objects in the
appliance
Provide for sufficient
clearance between objects
inside the appliance;
remove the excess of
objects
Too low a temperature was
set
Select higher temperature
setting
To Next Page
Loading...