Installation and operation
700182G 13 / 22
– take out contents of the appliance;
– tape firmly all loose elements in the internal chamber and tape the door;
– the appliance may only be transported in vertical position.
• The electric socket should be e asily accessible s o it is possibl e to quickly disco nnect the pow er cord whe n necessary. The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the power c ord when nec essary. The electric socket should be e asily accessible s o it is possibl e to quickly discon nect the pow er cord whe n necessary.
• Set the 2 front feet, by screwing them in or out, so that the appliance stands
stably.
HINWEIS
IMPORTANT!
The appliance is not suitable for built-in installation.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• The appliance should be left standing upright for at least 4 hours, before it is
connected to power supply.
5.2 Operation
Indications for the User
• The bottle cooler is perfectly designed for storing 0.75 l bottles. The maximum
volume of the appliance is provided on the basis of the size of this bottle.
• When filling the appliance, always make sure that the bottles do not hinder
closing of the door.
• In the case of concurrent filling wit many bottles, the cooling process of
individual bottles to the desired temperature takes more time.
• If possible, fill the bottle cooler with bottles containing beverage of the same
type, to set the optimum temperature.
• The more bottles in the bottle cooler, and the longer the door is kept open, the
higher the energy consumption. Do not overfill the appliance and pay attention
to the opening time of the door.
• To limit the loss of temperature in the appliance, reduce the door opening time
to the minimum. Also, do not open the door too frequently.
• In the event of a sudden power failure, avoid opening doors in order to avoid
loss of cool air.
To Next Page
Loading...