16
1. Introduction
Dear Customer,
Thank you for purchasing this product.
This product meets the requirements of statutory European and national requirements. To maintain this status and
to ensure safe operation, you as the user must observe these operating instructions!
Read the complete operating instructions before taking the product into operation and observe all
operation and safety information!
All company names and product names are trademarks of their respective owners. All rights reserved.
In case of any technical questions, contact or consult:
Germany: Tel. no.: +49 9604 / 40 88 80
Fax. no.: +49 9604 / 40 88 48
E-mail: tkb@conrad.de
Mon. to Thur. 8.00am to 4.30pm, Fri. 8.00am to 2.00pm
2. Intended Use
The lab mains adapter is a potential-free voltage source for operating small low-voltage consumers. It was developed
for universal use in research, development, production, service and training. Consumers are connected via the
sockets at the front of the device.
The connected consumer’s power consumption must not exceed the maximum ampere value indicated in the
technical data.
Observe all safety information in these operating instructions. They contain important information on
handling of the product.
Before taking the product into operation, read the complete operating instructions carefully. They contain important
information on proper operation of the device. Please keep them for later use.
To Next Page
Loading...
Need help?
General
