Safe operation guidelines
• The product should not come in contact with any liquid. Never immerse the
product in water or wet it. Do not use the product in the rain or humid
environments. Corrosion reactions may occur after water goes into the product,
which may cause battery spontaneous combustion and may even cause an
explosion.
• If the product is on fire, use a carbon dioxide fire extinguisher, water, water mist,
sand, fire blanket and dry powder immediately to put out the fire. Please select
the fire extinguishing method in the recommended sequence above according to
the actual situation.
• Use the product in the environment temperature between 0 °C and 40 °C.
• Do not disassemble the product in any way. If the battery is punctured during
disassembly, it will cause the leakage of the electrolyte inside the battery, and
even trigger a fire or explosion.
• Do not impact mechanically, grind or throw the product. Do not place heavy
objects on the product.
• Do not heat the product. Do not place the product in a microwave oven or
pressure cooker.
• Do not place the product near the heat source (stove or heater, etc.) or place it in
a car in the hot weather. Do not store the product in an environment with over
60 °C. The ideal storage environment temperature is 22 °C to 30 °C.
• Do not store the battery for a long time after the battery is completely discharged
to avoid the battery entering the over-discharge state and causing damage to the
battery cell, which will not be able to reuse.
Notice
• BaseusControl smartphone handheld gimbal stabilizer is a high precision control
device. Damage may be caused to BaseusControl if it is dropped or subject to
external force, and this may result in malfunction.
• Make sure the rotation of the gimbal axes is not blocked by external force when
BaseusControl is turned on.
• BaseusControl is not waterproof. Prevent contacts of any kind of liquid or cleaner
with BaseusControl. It is recommended to use dry cloth for cleaning.
• Protect BaseusControl from dust and sand during use.
To Next Page
Loading...