Basler A302f - Page 45

Configuring the Camera
BASLER A302f 4-7
DRAFT
Video Mode Control and Status Registers for Format_7
The base address for each Format_7, Mode_0 camera control register is:
Bus_ID, Node_ID, FFFF F1F0 0000
This address is contained in the Format_7 section of the “Inquiry Registers for Video Frame Rate
and Base Address of the Video Mode Command and Status Registers for the Scalable Image Size
Format.” A register has been prepared for each video mode that is Format_7, Mode_x.
The offset field in each of the tables is the byte offset from the above base address.
Video Mode Control and Status Registers for Format_7, Mode_0
Offset Name Notes
000h MAX_IMAGE_SIZE_INQ
004h UNIT_SIZE_INQ
008h IMAGE_POSITION
00Ch IMAGE_SIZE
010h COLOR_CODING_ID
014h COLOR_CODING_INQ
034h PIXEL_NUMBER_INQ
038h TOTAL_BYTES_HI_INQ
03Ch TOTAL_BYTES_LO_INQ
040h PACKET_PARA_INQ
044h BYTE_PER_PACKET TOTAL_BYTES_LO_INQ / BYTE_PER_PACKET
must be
≤ 4095.