Introduction
Basler IP Camera 1
1 Introduction
1.1 About this Document
This document is intended for administrative users of the camera. Previous experience with
networking will be a great help when using this document.
This document assumes that you have already followed the instructions in the Installation Guide to
install your camera.
1.2 Precautions
CAUTION
Electrical Shock Hazard
Touching the camera’s internal components may result in an electrical shock.
1. Do not open the camera housing. The housing contains no user serviceable
parts.
NOTICE
The camera is not designed for outdoor use and can be damaged by excessively damp or wet
conditions.
1. If you are using the camera outdoors, you should mount the camera in a weatherproof
housing.
To Next Page
Loading...
Need help?
General
