1110
EN EN
Consumable
Heater Chamber
glo™ Tobacco
Heater
INSTRUCTIONS FOR USE
01 Charge
Insert the USB cable into the
USB charging port of the glo™
tobacco heater and connect
with a computer’s USB port
or the provided AC adaptor.
The lights on the control
button will indicate the
charging status.
It takes 1-2 hours to fully charge the battery, which will provide
more than 20 sessions.
The glo™ tobacco heater can be used whilst plugged in as
long as it has enough charge. However, charging will be
paused until the session is complete.
02 Insert a neo™ stick
Slide open the shutter on top of the glo™ tobacco heater
and gently insert a neo™ stick until you feel the stick
touching the bottom of the glo™ tobacco heater. At this
point you should still see the top of the coloured collar
on the tipping of the neo™ stick.
Normal super slim cigarettes will not work with the glo™
tobacco heater. Please only use neo™ sticks.
CHARGING STATUS:
Up to 25% charged
Up to 50% charged
Up to 75% charged
Up to 99% charged
100% charged
To Next Page
Loading...
