PAGE 112 / 119
USER MANUAL NUMBER/VERSION: MU-001/12.0 APPLICATION DATE: 10/10/19
C/ Illa de Buda, 2 (P.I. Sud-Oest)
08192 Sant Quirze del Vallès [Barcelona - Spain]
T +34 935442003
www.batec-mobility.com info@batec-mobility.com
Checking tyre pressure:
Make sure the tyre pressure is as recommended for each model and that there are no
irregularities on the surface.
Cleaning the Batec:
Clean the frame with soap and warm water. Use car soap or another non-abrasive cleaning
agent. Dry it carefully. Never use a pressure washer to clean it.
Sand and salt water can damage some parts of the Batec after
prolonged contact. Clean it after use in these conditions.
Cleaning front and rear wheels:
Make sure the front wheel and rear wheels turn freely and eliminate any dirt.
Tightening screws:
Make sure all the screws and connections are tight. The recommended tightness for the
screws is:
• M5 screws: 5 Nm
• M6 screws: 8 Nm
• M8 screws: 18 Nm
To Next Page
Loading...
Need help?
General
