Bathroom Solutions CONTOUR User Manual

Customer Services
t: 01225 303900
Before you start
Wear suitable eye protection when drilling. Take care when using power tools near water - the use of a residual current
device (RCD) is recommended. Beware of hidden pipes or cables. Take care when drilling tiled surfaces as the drill might slip.
Use a piece of masking tape to prevent the drill from wandering.
The unit and basin are secured to a suitably strong / reinforced wall to ensure stability. Fix in place following instructions on
page 2. If in any doubt please consult an expert.
Installation and Fitting Instructions
CONTOUR / IOS - Instructions
Please retain for future reference
12/16 .V2
Once the basin is plumbed in nish by securing to the washstand with a silicone sealant (not supplied).
Fitting Basin

Bathroom Solutions CONTOUR Specifications

General

Brand	Bathroom Solutions
Model	CONTOUR
Category	Indoor Furnishing
Language	English

Summary

Installation and Fitting Instructions

Before You Start

Safety precautions and general preparation steps for installation, including eye protection and power tool safety.

Fitting the Basin

Procedure for plumbing and securing the basin to the washstand with silicone sealant.

Fixing Units to the Wall

Floor Mounted Units

Instructions for securing floor-mounted units to the wall via the back top brace.

Wall Mounted Units

Steps for hanging wall-mounted units using mounting plates, fixings, and adjustment guides.

Door Adjustment Procedures

Hinge Adjustment

Guidance on adjusting door hinges for alignment using specific screws based on hinge type.

Reversible Door Setup

Steps for choosing and setting up a reversible door, including removal and reattachment.

Drawer Adjustment and Removal

Fascia Alignment

How to adjust drawer fascias for correct alignment using interior covercap mechanisms.

Removing Drawer and Fascia

Procedure for removing the drawer using triggers and the fascia using release mechanisms.

Furniture Aftercare and Parts

Recommended Care Practices

Advice on wiping water, ventilation, and cleaning with a damp cloth or wax-free polish.

Prohibited Cleaning Methods

Instructions on what not to do, such as scrubbing, scouring, or using abrasive cleaning agents.

Replacement Component Information

Information on how to contact customer services for replacement parts.