To use under electric power, switch on at
the power switch on the underside of the
battery, turn on the power meter by
pressing the button on the top of the
battery, then press the POWER button on
the handlebar LCD display.
ELECTRIC BICYCLE FUNCTIONS
By means of the three buttons, MODE, UP and
DOWN, on the handlebar mounted display unit,
the various functions of the power controller and
Cycle Computer can be utilised.
See the following sections for details.
To turn off the LCD and the power to the bike, press and hold the
POWER button for 2 seconds.
If the power is left on for an extended
period and the bike is not used, then
the power will automatically be turned off.
To fully turn off the power press and hold the battery meter power
button, located on the top of the battery, and also switch off at the
power switch on the underside of the battery.
To Next Page
Loading...
