Purification Systems
Page 29 3rd Edition, Rev 0 Chg 6
4.5 Purification Cartridge Applicability
4.5.1 Purification Chamber Position References
The key to determining the reference location of the chamber and it corresponding cartridge is shown in
Figure 4-7. The location begins with A closest to the System Output and works back toward the Com-
pressor Input the with as many letters as required. The Oil and Water Separator is not designated but is
always closest to the Input. In Table 4-1 through Table 4-4 the Cartridge Part Numbers are cross-indexed
to the Purification System Model Number and the highlighted Chamber Part Number. The Cartridge Part
Numbers are used with Figure 4-24 through Figure 4-30 for determining the correct part numbers for
maintenance and repair.
Figure 4-7 Purification Chamber Position
Table 4-1: Cartridge Applications for Purification Systems: P1 to P4
P/N Description
P1
P2
P2S
IP2S
P4
080143 10” Chamber A A
080144 27" Chamber A B
080145 27" Securus Chamber A A
058821A 10” Purification Cartridge, Breathing A A
058825A 27" Dryer Cartridge B
058827A 27” Purification Cartridge, Breathing A
060037A 27” Securus Cartridge, Breathing A A
OUT
Reference Positions
A
B
C
IN
To Next Page
Loading...