Page 8 For technical questions, please call 1-888-866-5797. Item 64940
SAFETY OPERATION MAINTENANCESETUP
Specifications
Battery Type Bauer 20V Li‑Ion 57007 (sold separately)
Charger Type Bauer 20V Li‑Ion 57006 (sold separately)
Chain Speed 3.8m/s
Guide Bar 250mm (10″) Sprocket Nose
Saw Chain 10", 3/8" Pitch, 0.043" Gauge
Lubrication
Bar and chain oil.
If not available, SAE 30W motor oil may be used.
Note: This electric Chainsaw is for cutting small logs and for lighter weight trimming jobs.
A more powerful Chainsaw may be needed for heavy duty use.
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 22.
Charging
Charge battery before using this tool. Follow instructions included with
battery charger. Battery Pack and Charger sold separately.
Functions
Oil Reservoir
Cap
Guide Bar
Saw Chain
Front Hand Guard
Front Handle
Trigger
Lockout
Trigger
Rear
Hand Guard
Rear Handle
Spiked
Bumper
Oil Level
Window
To Next Page
Loading...