Page 13For technical questions, please call 1-888-866-5797.Item 57003
Installing the Auxiliary Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without the Auxiliary Handle properly installed.
Alternate
locations
Auxiliary Handle
1. The Auxiliary Handle may be installed
in one of three positions: On either side
or on top of the Gear Housing.
2. Screw the threaded end of the
Auxiliary Handle into the selected position.
Tighten securely before beginning work.
Functions
Spindle
Lock
Trigger
Trigger Lock
SAFETYOPERATIONMAINTENANCE SETUP
To Next Page
Loading...
