Bauer 1992E-B - User Manual

Need help?

Do you have a question about the Bauer 1992E-B and is the answer not in the manual?

Summary

Important Safety Information

General Power Tool Safety Warnings

Provides essential safety guidelines for operating power tools, covering work area and electrical safety.

Grounding

Grounded Tools: Tools with Three Prong Plugs

Explains how to connect tools requiring grounding using a three-prong plug and outlet.

Double Insulated Tools: Tools with Two Prong Plugs

Details the use of double insulated tools that do not require grounding.

Extension Cords

Provides guidance on selecting and using appropriate extension cords for power tools.

Operating Instructions

Setting and Testing

Instructions for setting up the tool, including safety precautions before operation.

Drill Bit Installation

Step-by-step guide on how to properly install and secure drill bits or screwdriver bits.

Side Handle Setup

Instructions for correctly positioning and securing the auxiliary side handle.

Installing and Adjusting Depth Gauge

Guide on attaching and setting the depth gauge for precise drilling depth.

Mode Selection

How to switch between plain drilling and hammer drilling modes using the mode selector.

General Instructions for Use

Metal Drilling Tips

Best practices and tips for drilling effectively and safely into metal materials.

Wood Drilling Tips

Recommendations and advice for drilling into wood with optimal results and safety.

Maintenance and Servicing Instructions

Cleaning, Maintenance, and Lubrication

Procedures for cleaning the tool before and after use, and periodic maintenance.

Summary

Important Safety Information

General Power Tool Safety Warnings

Provides essential safety guidelines for operating power tools, covering work area and electrical safety.

Grounding

Grounded Tools: Tools with Three Prong Plugs

Explains how to connect tools requiring grounding using a three-prong plug and outlet.

Double Insulated Tools: Tools with Two Prong Plugs

Details the use of double insulated tools that do not require grounding.

Extension Cords

Provides guidance on selecting and using appropriate extension cords for power tools.

Operating Instructions

Setting and Testing

Instructions for setting up the tool, including safety precautions before operation.

Drill Bit Installation

Step-by-step guide on how to properly install and secure drill bits or screwdriver bits.

Side Handle Setup

Instructions for correctly positioning and securing the auxiliary side handle.

Installing and Adjusting Depth Gauge

Guide on attaching and setting the depth gauge for precise drilling depth.

Mode Selection

How to switch between plain drilling and hammer drilling modes using the mode selector.

General Instructions for Use

Metal Drilling Tips

Best practices and tips for drilling effectively and safely into metal materials.

Wood Drilling Tips

Recommendations and advice for drilling into wood with optimal results and safety.

Maintenance and Servicing Instructions

Cleaning, Maintenance, and Lubrication

Procedures for cleaning the tool before and after use, and periodic maintenance.

The Bauer 1992E-B is a heavy-duty variable speed reversible hammer drill designed for a range of drilling applications in wood, concrete, and steel. This corded power tool is intended for professional and DIY use, offering versatility with its dual drilling modes and adjustable speed control.

Function Description:

The primary function of the Bauer 1992E-B is to provide powerful drilling and hammer drilling capabilities. It features a variable speed trigger that allows the user to control the rotational speed from 0 to 2800 RPM, enabling precise drilling for various materials and tasks. The reversible function, controlled by a direction switch, allows for both forward (clockwise) and reverse (counterclockwise) rotation, useful for driving and removing fasteners, as well as freeing jammed drill bits. The hammer drill mode, activated via a mode selector switch, adds a percussive action (up to 45,000 BPM) to the rotational drilling, making it highly effective for drilling into masonry and concrete. For continuous operation, a trigger lock button is provided, which is particularly useful for prolonged drilling tasks in soft materials. An auxiliary side handle enhances control and stability, especially when dealing with the high torque produced by the tool. A depth gauge is included to assist in drilling holes to a specific, consistent depth.

Important Technical Specifications:

Electrical Rating: 120VAC / 60Hz / 7.5A
Rotational Speed: 0-2800 RPM (variable speed)
Impact Rate: 0-45,000 BPM (in hammer drill mode)
Chuck Capacity: Up to 1/2"
Wood Capacity: 1" (25mm)
Concrete Capacity: 5/8" (16mm)
Steel Capacity: 1/2" (13mm)
Insulation: Double Insulated (does not require grounding)

Usage Features:

Variable Speed Control: The trigger allows for precise speed adjustment, crucial for starting holes accurately and adapting to different material densities.
Reversible Function: A direction switch enables easy switching between forward and reverse rotation, facilitating both drilling and fastener removal.
Dual Mode Operation: A mode selector switch allows users to choose between plain drilling (for wood, metal) and hammer drilling (for masonry, concrete), enhancing the tool's versatility.
Trigger Lock Button: For extended use, the trigger can be locked in the ON position, reducing user fatigue. However, it is cautioned against using this feature for drilling hard materials like steel or concrete, as a jammed bit can cause the tool to twist uncontrollably.
Auxiliary Side Handle: This adjustable handle provides improved grip, control, and stability, especially when encountering high torque or during hammer drilling operations. It can be rotated to a desired orientation for user comfort and control.
Depth Gauge: The included depth gauge attaches to the side handle, allowing users to set and maintain a consistent drilling depth, which is particularly useful for repetitive tasks or when precise depth is required.
Chuck Key: The tool uses a chuck key to securely tighten and loosen drill bits in the 1/2" chuck, ensuring bits are firmly held during operation. A key holder is integrated into the power cord for convenient storage.
Corded Design: The 120VAC power cord ensures continuous power without the need for battery charging, making it suitable for prolonged work. It is a double-insulated tool, meaning it does not require a grounded outlet.
Safety Features: The manual emphasizes the importance of personal protective equipment, proper work area setup, and electrical safety, including the use of GFCI-protected supplies in damp locations and appropriate extension cords.

Maintenance Features:

Regular Inspection: Before each use, the tool should be inspected for loose hardware, misalignment or binding of moving parts, damaged cord/electrical wiring, cracked or broken parts, and any other condition that might affect its safe operation.
Cleaning: After each use, external surfaces should be wiped with a clean cloth. Periodically, and after extensive use, compressed air should be blown over the motor housing slots to remove accumulated dirt and debris, preventing overheating and maintaining performance.
Cord and Plug Maintenance: The power cord and plug should be regularly inspected for damage. If damaged, they must be replaced by a qualified service technician to prevent electrical shock hazards.
Accessory Care: Keeping cutting accessories sharp and replacing dull or damaged bits is crucial for optimal performance and safety.
Troubleshooting Guide: The manual includes a troubleshooting section to help users diagnose and resolve common issues such as the tool not starting, operating slowly, decreased performance, excessive noise/rattling, and overheating. This guide provides possible causes and likely solutions, often recommending professional service for internal damage or wear.
Storage: The tool should be stored indoors, out of children's reach, after use and cleaning.

The Bauer 1992E-B is designed for durability and performance, but adherence to the provided safety warnings and maintenance instructions is critical for ensuring its longevity and safe operation.