To Next PageTo Next Page
Need help?Do you have a question about the Bauer 20V Hypermax Lithium 1895C-B and is the answer not in the manual?
General| Voltage | 20V |
|---|---|
| Model | 1895C-B |
| Battery Type | Lithium-Ion |
| Chuck Size | 1/2 inch |
| Weight | 3.75 lbs |
| Type | Drill |
| Max Torque | 500 in-lbs |
Explains DANGER, WARNING, CAUTION, and NOTICE symbols for hazard identification.
Covers power tool safety and work area preparation.
Covers water exposure, operator alertness, PPE, safe handling, and proper attire.
Proper use, care, storage, and maintenance of power tools and battery packs.
Keep battery pack dry and avoid opening, dropping, short-circuiting, puncturing, or incinerating.
Reduce vibration injury risk by consulting doctor, avoiding smoking, using gloves, and proper grip.
Ensure proper grounding and note that extension cords are not used with the charger.
Explains symbols for double insulated, voltage, amperage, RPM, eye injury, fire risk, electric shock, and explosion.
Details battery type, chuck capacity, charger input rating, and no load speed.
Read IMPORTANT SAFETY INFORMATION before setup or use.
Identifies key components like Speed Switch, Locking Ring, Light, Chuck, Trigger, and Belt Clip Area.
Ensure trigger is off and battery pack removed before any procedure.
Charge battery after unpacking and before first use.
Instructions for installing bits using the keyless chuck, emphasizing safety and bit condition.
Adjust speed switch for desired RPM and set direction switch for forward/reverse or lock.
Instructions on how to attach the belt clip using the supplied screw.
Designate a clean, well-lit area, free from distractions and hazards.
Secure loose workpieces with a vise or clamps to prevent movement.
Secure drill with both hands, set direction and speed, apply light pressure, and release trigger if bit jams.
Turn off tool, remove battery pack, clean, and store indoors out of children's reach.
Inspect tool for leaks, loose hardware, misalignment, or damage before each use.
Wipe external surfaces with a clean cloth after use.
Recycle/dispose of Li-Ion battery properly; store pack, charger, and tool in dry, indoor area.
Check battery connection/charge, burnt-out pack, internal damage, or incorrect direction switch setting.
Address slow operation, decreased performance, noise, rattling, or overheating by checking causes.
Lists all parts with their corresponding numbers, descriptions, and quantities.
Visual representation of how the parts fit together for assembly.
Covers defects in materials and workmanship for 90 days; excludes misuse, abuse, and lack of maintenance.
Return product with proof of purchase and complaint explanation for repair or replacement.
