Product description
Components Function
Boom Movable connection piece between base machine and kinematic
triangle.
Boom cylinders Enable adjustment of the operating radius.
Swing mechanism Enables continuous turning and arresting of the upper carriage in
any position.
Counterweight Ensures stability of the equipment.
Main winch with main rope Lifting equipment for working with the process equipment.
Auxiliary winch with auxiliary
rope
Lifting equipment for assembly work and auxiliary work.
Cab The equipment operator controls the equipment from the cab.
Kinematic triangle Enables parallel adjustment of the mast.
Tilting cylinder Enables folding of the upper mast section when lowering the mast
and alignment of the upper mast section when raising the mast.
The tilting cylinder is mounted in the upper mast section.
Mast
(upper mast section, lower
mast section)
Guides the attached components of the process equipment.
Mast pivot Connection point between the mast and the boom.
Enables inclination of the mast.
Masthead Guides the main rope and the auxiliary rope.
Backstay cylinders Support the mast.
Enable adjustment of the mast inclination and raising and lowering
of the mast.
Upper carriage Carries the attachment with the process equipment as well as all
the components required for the equipment to function.
Opening cylinder Opens and closes the retaining arms of the Kelly guide.
The opening cylinder is mounted on the upper mast section.
Supporting boom Enables parallel adjustment of the mast.
Undercarriage Carries the upper carriage and enables the equipment to be
driven.
Crowd cylinder Generates the crowd forces and crowd movements and transmits
them to the rotary drive.
The crowd cylinder is mounted in the lower mast section.
To Next Page
Loading...
