17 CONFORMITY DECLARATION
EC Conformity Declaration
according to EC Directive 2006/42/EC
The manufacturer
FAN Separator Gesellschaft m.b.H.
Bernecker Straße 5, D-95509 Marktschorgast, Germany
Tel.: +49 9227 938-400; Fax: +49 9227 938-444
declares that the machine named below
Machine designation FAN Press Screw Separator
Machine type / base device PSS 1.1-300
correspondingly applies to the relevant provisions of the following directives.
Machinery Directive 2006/42/EC
Electromagnetic Compatibility Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
The following standards in the current versions were applied correspondingly:
EN ISO 12100:2011/03 Safety of machinery -General principles for design risk assess-
ment and risk reduction
EN ISO 13857:2008/08 Safety of machinery – Safety distances to prevent hazard zones
being reached by upper and lower limbs
EN 349:2008/09 Safety of machinery - Minimum gaps to avoid crushing of parts of
the human body
This declaration becomes void in event of any changes to the machine made without the ap-
proval of FAN Separator GmbH.
Party responsible for documentation: Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria
To Previous Page
Loading...