Bauhn AFTWS-0821 - User Manual

To Next Page

Display 1.69”, 240 x 280 pixels

Ingress protection IP67

Charging time 3 hrs (approx.)

Charging base

input

5V 180mA

Bluetooth Range < 10m

Built-In Battery Li-ion 3.8V 240mA

Weight 50g (approx.)

Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)

Specications

Smart Watch

with Interchangeable Straps

User Guide

1300 002 534

Model: AFTWS-0821

Product Code: 705928 08/2021

info@tempo.org

Warranty Information

Repair and Refurbished Goods or Parts Notice

The product is guaranteed to be free from defects in workmanship

and parts for a period of 12 months from the date of purchase.

Defects that occur within this warranty period, under normal use

and care, will be repaired, replaced or refunded at our discretion,

solely at our option with no charge for parts and labour. The

benefits conferred by this warranty are in addition to all rights and

remedies in respect of the product that the consumer has under the

Competition and Consumer Act 2010 and similar state and territory

laws.

Our goods come with guarantees that cannot be excluded under

the Australian Consumer Law. You are entitled to a replacement

or refund for a major failure and to compensation for any other

reasonably foreseeable loss or damage. You are also entitled to

have the goods repaired or replaced if the goods fail to be of

acceptable quality and the failure does not amount to a major

failure.

The Bluetooth

word mark and logos are registered trademarks

owned by Bluetooth SIG,Inc. and any use of such marks by Hands

(IP) Holdings Pty Ltd is under license. Other trademarks and trade

names are those of their respective owners.

Unfortunately, sometimes faulty products are manufactured, which

need to be returned to the supplier for repair.

Please be aware that if your product is capable of retaining user-

generated data (such as files stored on a computer hard drive,

telephone numbers stored on a mobile telephone, songs stored on

a portable media player, games saved on a games console or files

stored on a USB memory stick) during the process of repair, some

or all of your stored data may be lost. We recommend you save this

data elsewhere prior to sending the product for repair.

You should also be aware that rather than repairing goods, we

may replace them with refurbished goods of the same type or use

refurbished parts in the repair process.

Please be assured though, refurbished parts or replacements are only

used where they meet ALDI’s stringent quality specifications.

If at any time you feel your repair is being handled unsatisfactorily,

you may escalate your complaint. Please telephone us on 1300 002

534 or write to us at:

Tempo (Aust) Pty Ltd ABN 70 106 100 252

PO Box 6056, Frenchs Forest, NSW 2086, Australia

Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765

Tempo Help Desk: 1300 002 534 (Aust)

(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)

Email: info@tempo.org

NOTE: The results and measurements of heart rate, blood

pressure and blood oxygen data cannot be used for medical

reference and should be used as a guide only.

Warranty returns

Should you for any reason need to return this product for a

warranty claim, make sure to include all accessories with the

product.

Product does not work?

If you encounter problems with this product, or if it fails to

perform to your expectations, make sure to contact our After

Sales Support Centre on 1300 002 534.

1300 002 534

Model: AFTWS-0821

Product Code: 705928 08/2021

info@tempo.org

Shortcuts menu

Watch Face Screen

Tap “Dial switch” in the settings menu. Swipe left/right for different

watch face options, then tap the screen again to conrm selection.

You can change the style of the watch face on the Da Fit app. Go to

the watch faces menu on the app, then tap on the desired design

and the watch will display the selected face.

Swipe down to access the shortcut menu

where you can adjust:

• Brightness

• Settings

• Weather

• Menu style

• Info

• Bluetooth call

Language

On the Da Fit app, go to the “Others” menu and change to the

desired language.

Notication

Swipe up to display notication and messages. On the Da Fit app,

tap “notications” to enable messages and notication alerts.

Sedentary Reminder

On the Da Fit app, go to the “others” menu and set “Remind to

move”on. The watch will alert you from 10am to 10pm.

Drink Water Reminder

On the Da Fit app, go to the “others” menu and turn “Drink water

reminder” on. Set the start timer and drinking interval as desired.

The watch will remind you each interval.

Camera (Remote Capture)

On the Da Fit app, tap on “shutter” to use the watch as a camera

remote for your smart phone (ensure the app is connected to your

watch). Tap the watch screen to remotely take a photo.

Weather

On the main menu, tap on the icon to display the weather. You

must be connected to the Da Fit app for the function to work. On

the app, go to the “Others “ menu and turn weather on and type in

your city. You must have internet/mobile connection and your smart

phones location/GPS must be turned on.

NOTE: For Android devices, when using Bluetooth music

playback, camera and weather:

Go to the app info>set “allow background activity” to on.

Go to the app info>battery usage>battery optimisation. Select

“not optimised.”

Please see the “Background Operation Protection Guide” on the

Da Fit app for more detail.

10 11 12 139

Need help?

Do you have a question about the Bauhn AFTWS-0821 and is the answer not in the manual?

Overview

This document describes the BAUHN Smart Watch with Interchangeable Straps, model AFTWS-0821, product code 705928 08/2021. It serves as a user guide, providing instructions for setup, operation, and maintenance.

Function Description:

The BAUHN Smart Watch is designed to be a versatile wearable device that tracks various health and activity metrics, provides notifications, and offers Bluetooth calling and music playback functionalities. It features an interchangeable strap design, allowing users to customize its appearance. The watch connects to a smartphone via the "Da Fit" app, available for both Android and iOS, to sync data and enable additional features.

Important Technical Specifications:

Display: 1.69", 240 x 280 pixels
Ingress Protection: IP67 (Dust tight and protected against immersion in water up to 1 meter for 30 minutes)
Charging Time: Approximately 3 hours
Charging Base Input: 5V⎓180mA
Bluetooth Range: < 10m
Built-In Battery: Li-ion 3.8V 240mA
Weight: Approximately 50g
Dimensions (mm): 38.5 (W) x 43 (H) x 12.2 (D)

Usage Features:

First Time Use & Charging:

Before initial use, the watch requires approximately 3 hours of charging. To charge, place the watch on the charging dock, aligning the charging pins on the watch's back with those on the dock. The watch will snap into position. Connect the charging dock to a USB charging adapter (not included) or a computer's USB port. Unplug the dock once fully charged.

Changing Straps:

The watch comes with an additional strap. To change straps, turn the watch over and push the needle knobs in the direction indicated in the illustration. Remove the old strap and fit the new one.

Turning On/Off:

Press and hold the side button for 3 seconds to turn the watch on or off.

Connecting to the Da Fit App:

Download the "Da Fit" app from the app store (Android or iOS) by searching or scanning the provided QR codes.
Open the app and tap the "Add A Device" icon. The app will search for nearby devices.
Select "AFTWS0821" from the device list.
Tap "Pair" on the pop-up window to connect.
For Android devices, ensure "allow background activity" is On in App info > Battery usage > Battery optimisation, selecting "not optimised." Refer to the "Background Operation Protection Guide" in the Da Fit app for specific mobile models.

Disconnecting from the App:

Open the Da Fit app on your smartphone.
Tap the icon and select "REMOVE" to disconnect the watch from the app.
Additionally, open your smartphone's Bluetooth settings.
For iOS, tap the "i" icon next to "Audio_AFTWS0821/AFTWS0821" and tap "Forget This Device."

Turning On the Screen:

Raise your arm while wearing the watch, or press the side button. Press the side button again to turn off the screen. Press the side button on any screen or swipe right to return to the main screen. Note that raising your arm too quickly or slowly may not activate the screen. In the Da Fit app, go to the "others" menu and set "Quick View" to "on" to enable the raise-to-wake feature.

Navigation on the Home Screen:

Swipe right: Access the main menu (swipe further to display different menus and settings; tap icons to enter).
Swipe left: Quick app access to Pedometer, Sleep Monitor, Heart Rate, Bluetooth Calls, Weather, Blood Pressure, and Oxygen monitoring.
Swipe up: Notifications screen (swipe down to return to main screen).
Swipe down: Shortcut menu (tap brightness bar to adjust).

Navigation in Any Screen:

Swipe right or press side button: Return to the main screen.
Tap any icon: Enter the sub-screen.

Applications:

Ensure permissions are allowed and notification settings are enabled on the respective smartphone application for full functionality.

Set up Bluetooth Calling:

To enable Bluetooth calls, music playback, and remote capture:

Tap the icon in the settings menu or the icon in the shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the Bluetooth call menu, where you can view call records, contact list, and dial pad.
Tap the icon to reset the Bluetooth call.

Bluetooth Calling (Android & iOS):

Android: Go to mobile settings > Bluetooth. Select "+ Pair new device" and "Audio_AFTWS0821" or tap "Pair" on a pop-up. The icon will light up on the shortcut menu.
iOS: Go to mobile settings > Bluetooth. Select "Add new device" and "AFTWS0821." The icon will light up on the shortcut menu. Then select "Audio_AFTWS0821" from the Bluetooth setting menu.
Note for iOS: Music playback and remote capture require pairing "Audio_AFTWS0821" in Bluetooth settings. The watch will prompt connection if not paired. Both "Audio_AFTWS0821" and "AFTWS0821" must be paired for full functionality.

Call Operation:

Once connected, you can answer/reject calls directly from the watch. Tap the icon to answer, and the icon to reject.

Bluetooth Music Playback:

Tap the icon to enter the Bluetooth music playback menu.
Open your smartphone's music app.
Tap the icon to play/pause.
Tap the / icon to play previous/next song.

Note: Requires "Audio_AFTWS0821/AFTWS0821" Bluetooth connection and Da Fit app connection.

Outdoor Running:

In the Da Fit app, select "Outdoor running." The app records GPS data from your smartphone and displays it on a map. Requires internet/mobile connection and location/GPS services enabled on your phone.

Exercise:

On the main menu, tap the icon to enter the exercise/sports interface. There are 8 activities: walking, running, cycling, skipping, badminton, basketball, football, and swimming.

Swipe right to display the stop/pause icon. Tap to pause/stop.
Swipe left to resume activity.
Tap the icon to exit and save the activity.
The watch only saves activity data if the distance is more than 200 steps and duration is over 5 minutes.

Heart Rate:

On the main menu, tap the icon, then tap the screen to start measuring heart rate. The last 7 measurements sync to the Da Fit app once connected.

Continuous Heart Rate Detection:

In the Da Fit app, go to "others" menu and set "Continuous Heart Rate Detection" to "on" for continuous recording.

Blood Pressure:

On the main menu, tap the icon, then tap the screen to start measuring blood pressure. The watch vibrates when measurement is complete, and data is displayed. The last 7 measurements sync to the Da Fit app once connected.

Blood Oxygen:

On the main menu, tap the icon, then tap the screen to start measuring blood oxygen levels. The last 7 measurements sync to the Da Fit app once connected.

Sleep Monitor:

On the main menu, tap the icon to enter the Sleep interface. Track sleep patterns and view detailed records in the Da Fit app. The watch must be worn during sleep for this function to work.

Activity:

On the main menu, tap the icon to enter the Activity interface. The watch tracks steps taken, calories burnt, and distance traveled.

Set Alarm:

Set alarms in the Da Fit app and synchronize them to the watch. Turn "alarm" on and set the desired time. Up to 3 alarms can be set, and the watch will vibrate during the alarm.

Language:

In the Da Fit app, go to the "Others" menu to change the desired language.

Notification:

Swipe up on the watch to display notifications and messages. In the Da Fit app, tap "notifications" to enable message and notification alerts.

Sedentary Reminder:

In the Da Fit app, go to the "others" menu and set "Remind to move" to "on." The watch will alert you from 10 am to 10 pm.

Drink Water Reminder:

In the Da Fit app, go to the "others" menu and turn "Drink water reminder" to "on." Set the start timer and drinking interval. The watch will remind you at each interval.

Camera (Remote Capture):

In the Da Fit app, tap "shutter" to use the watch as a remote for your smartphone camera (ensure the app is connected). Tap the watch screen to remotely take a photo.

Weather:

On the main menu, tap the icon to display the weather. Requires connection to the Da Fit app. In the app, go to the "Others" menu, turn weather on, and type in your city. Requires internet/mobile connection and smartphone location/GPS enabled.

Shortcuts Menu:

Swipe down to access the shortcut menu, where you can adjust:

Brightness
Settings
Weather
Menu style
Info
Bluetooth call

Watch Face Screen:

Tap "Dial switch" in the settings menu. Swipe left/right for different watch face options, then tap the screen to confirm selection. You can also change the watch face style in the Da Fit app's watch faces menu.

Maintenance Features:

Charging Pins: To keep charging pins clean, use a damp cloth and gently clean them weekly.
Sensor Cleanliness: When using heart rate, blood pressure, and blood oxygen functions, ensure the smart watch has good contact with your wrist and that the sensor is clean, free of dirt or debris.
Warranty: The product is guaranteed for 12 months from the date of purchase against defects in workmanship and parts. Defects will be repaired, replaced, or refunded at the discretion of the provider.
Repair/Refurbished Goods Notice: If the product requires repair and is capable of retaining user-generated data, it is recommended to save this data elsewhere as it may be lost. Refurbished goods or parts may be used in the repair process, meeting ALDI's quality specifications.

Important Notes:

Images in the guide are for reference only; the watch may be a different color.
For Android devices, when using Bluetooth music playback, camera, and weather, ensure "allow background activity" is "on" and "battery optimisation" is "not optimised" in app info settings.
The results and measurements of heart rate, blood pressure, and blood oxygen data cannot be used for medical reference and should be used as a guide only.