Bauhn APPS-0723 - Recording; Microphone; Guitar

OPERATION | 13
Recording
• Plug in your USB device or Micro SD (TF) card into the USB/Micro SD (TF) card slot on the speaker. The speaker will
automatically play the music les.
• Press the REC button on the speaker to playback the recordings on the USB/ Micro SD (TF) card. Press the / buttons on
the speaker to select the previous or next recording.
• Test the microphone and ensure your voice is audible from the speaker.
• Press and hold the REC button on the speaker to start your new recording. Press the REC button again to stop recording.
• The speaker will automatically play the saved recording. Press the button on the speaker or on the remote control to pause
playback.
• Note: the recording function can only record your voice and background music on AUX and FM mode. Ensure to select AUX or
FM mode before recording.
Microphone
• Plug in a wired microphone (not included) into the MIC 1 port of the speaker. Another wired microphone can be plugged into
the MIC 2 port of the speaker if 2 microphones are desired.
• Use the MIC VOLUME control knob on the speaker to adjust the microphone volume level.
• Press the ECHO+ / ECHO- buttons on the speaker to adjust the echo level.
• Press and hold the MODE button on the speaker on remote control to turn microphone priority on/off. This function is off by
default. Your vocals will overpower the background music.
• Press and hold the ECHO+ button to turn on/off karaoke accompaniment function.
• After use, unplug the microphone and store away if not in use.
Guitar
• Plug in a wired guitar (not included) into the GUITAR IN port on the speaker.
• Press the GT +/GT- buttons on the speaker to adjust the guitar volume level
• After use, unplug the guitar and store away if not in use.