Why Bauhn LCD TV has no picture?
If your Bauhn LCD TV shows no picture, ensure the equipment is connected properly. Also, try adjusting the antenna or using an external antenna. Relocating the unit near a window or moving it away from devices that could cause interference might help. You can also auto-tune the unit again or try another channel.
What to do if Bauhn LCD TV has no sound or distorted sound?
If your Bauhn LCD TV has no sound or the sound is distorted, first ensure that the equipment is connected properly and the input setting for the TV is correct. Also, ensure the audio settings are properly set and the volume is not muted. If it is, press the MUTE button to restore the sound. Unplug any connected earphones. Adjust the volume to a suitable level using the VOL+ / VOL- button. If the picture from an HDMI source is not 4K, set the menu Menu > System > HDMI UHD setting to ‘Standard’.
Why my Bauhn ATV60UHD-0918 LCD TV remote control is not working?
If your Bauhn LCD TV remote control is not working, check that the batteries are correctly installed or replace them if exhausted. Make sure to point the remote control at the remote control sensor from a distance of no more than 6m, and remove any obstacles between the remote control and the sensor.
How to fix interference on Bauhn ATV60UHD-0918?
If you are experiencing interference on your Bauhn LCD TV, it could be due to electronic equipment nearby. Try relocating the TV or moving the interfering equipment away from the unit.
What to do if Bauhn LCD TV button operation is not effective?
If the button operation on your Bauhn LCD TV (unit and/or remote control) is not effective, it might be due to lightning, static electricity, or other factors. Disconnect the power plug and then reconnect it to resolve this issue.
How to synchronise sound with the picture on Bauhn LCD TV?
To synchronise the sound with the picture on your Bauhn LCD TV, go to Menu > Sound and gradually adjust the Audio Delay setting until the audio and picture are in sync.
Why Bauhn ATV60UHD-0918 has no power?
If your Bauhn LCD TV has no power, insert the power plug securely into the power outlet.
Identifies and describes physical buttons and ports on the back of the TV unit.
Steps to connect the TV to power and turn it on/off.
Guide for initial TV setup including language, country, and channel scanning.
How to switch between input sources and navigate TV channels.
Adjusting volume, picture modes, and sound modes for optimal viewing.
Setting sleep timer and adjusting picture aspect ratio.
How to access and navigate the Electronic Program Guide for broadcast schedules.
How to record live TV programs directly using the REC button.
Steps to access and play back recorded TV content.
Instructions for playing videos, music, photos, and text files from a USB device.
How to navigate menus and adjust general system preferences.
Solutions for common issues like no power, no picture, interference, and sound problems.
Troubleshooting steps for unresponsive remote controls.
Details on screen size, resolution, contrast, aspect ratio, and USB playback formats.
Information on power supply, consumption, physical dimensions, and weight of the TV.
To Next Page
General