10
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au
8. When you have nished all the settings, press the COST button to save
all your settings.
Note: During daylight savings, SUMMER is displayed on the
bottom right of the screen. In winter mode, there is no special
indicator on screen.
Tip: You can hold down the UP button to increase the number
quickly.
Setting the Overload Alert Threshold
The Bauhn Power Meter is equipped with an overload alert feature to
help identify power spikes or surges. When the set threshold is exceeded,
“OVERLOAD” will ash next to ENERGY on the display. Follow the below
instructions to set the overload alert threshold.
1. Press and hold the ENERGY button for 3 seconds to enter the
“OVERLOAD” setting. The rst number will begin to ash.
2. Push the UP button to change the ashing number.
3. Push the SET button to toggle between numbers.
4. Push the OK/CLOCK button to return to the home screen once the value
is set.
To Next Page
Loading...
Need help?
General
