107
1. Move left: Moves the selected list item one position to the left, thus
changing the position of the segment.
2. Move right: Moves the selected list item one position to the right,
thus changing the position of the segment.
3. Beginning: Moves the selected list item to the first position, thus
changing the position of the segment.
4. End: Moves the selected list item to the last position shown, thus
changing the position of the segment.
5. Hide this element: Removes the position number of the selected
list item thus making the segment invisible. Moves the list item to
the end of the list.
6. Show this element: Gives the selected list item the next available
position number, thus making the segment visible.
7. Insert text element: creates a new list item as new segment to
insert text.
8. Set to default: Resets all list elements and position numbers to
their default value.
10.4.3.1 Templates > Menu Item
You can configure the following segments for the presentation of menu
items. The segments of the default settings have the following position
number:
1 MI, 2 <Hotkey>, 3 <Label>, 4 <Status>, 5 <Shortcut>, <Menuname>
The segments, which are inserted between less than and greater than
symbols < > are placeholders for the appropriate segment name. Prefix
and suffix characters are shown in the appropriate segment name.
Segments and their meaning:
1. <Status>: Information about submenus.
2. <Menuname>: If you go down to sub menu levels in VarioUltra,
this segment will tell you the name of the higher-level menu, or the
menu above where you are. For example, if you’re in the
Templates menu, Menuname would be displayed as Settings.
Example configuration:
For the braille presentation, we want to display M instead of MI. To make
this change we would do the following:
1. Open Settings > Presentation > Templates > Menu item.
To Next Page
Loading...