Baum VarioUltra 20 - Templates > Textbox Read Only; Templates > List Box; Templates > File

109
2. In the dialog go to info field “braille” and select the assigned button
“edit”.
3. In the list “items” select the entry <hotkey>, which has no position
number.
4. Open the command menu by pressing S3 briefly and select “hide
this element”.
5. You are back in the list “items” and the entry <accelerator> has no
longer a position number and stands at the end of the list. This
setting is valid only for edit boxes (no info fields)
6. Confirm and close all dialogs with “OK”.
Remember: The hotkey is shown as single character when visible, or as
a highlighted character (with dot 8) when hidden. Please refer to section
10.3.2 Hotkeys for detailed instructions about this option.
10.4.3.5 Templates > Textbox Read Only
You can configure the following segments for the presentation of info
fields (textboxes read only) in dialogs. The segments of the default
settings have a position number.
1 IF, 2 <Hotkey>, 3 <Label>
Note that the segment <contents> cannot be repositioned or configured.
It is always on the last position.
10.4.3.6 Templates > List Box
You can configure the following segments for the presentation of list
boxes in dialogs. The segments of the default settings have a position
number.
1 LI, 2 <content>, 3 <Label> 4 <Accelerator>
10.4.3.7 Templates > File
You can configure the following segments for the presentation of files in
file and folder lists. The segments of the default settings have a position
number.
1 LI, 2 <text>, 3 <content>, 4 <size>, 5 <date>, 6 <path> (with “path:” as
prefix), 7 <Label>, 8 <Accelerator>
Example configuration: