Why is the hydraulic fluid overheating in my Baumalight Compact Loader?
The hydraulic fluid in your Baumalight Compact Loader may be overheating because the hydraulic fluid level is low, so add hydraulic fluid. Alternatively, the hydraulic cooler might be clogged, so clean the cooler.
What to do if my Baumalight Compact Loader unit will not move?
If your Baumalight Compact Loader won't move, make sure the park brake is disengaged and that the operator is standing on the operator platform, verifying the switch is engaged. Also, check the fuse on the circuit from the Lofa panel and replace it if necessary. You can find the fuse in the harness located behind the Lofa instrument panel in the engine compartment. Finally, check for power to the boom valve by checking if the light on the boom valve solenoid (A) connector is on with the engine stopped and the ignition switch in the on position. If the light is not on, check the fuse. If the fuse is good, check the wiring between the boom valve and fuse block. Also, the operator on board switch might not function properly, check the switch operation and replace it if necessary.
General| Brand | Baumalight |
|---|---|
| Model | TRL536D |
| Category | Utility Vehicle |
| Language | English |
To Next Page
