Manual cooking taking place
+ A Automatic cooking taking place
+ Timer in operation
NOTE: After having selected the operation, a period of time will
pass (about 3-4 seconds) before confirmation, during which the
data may be modifies.
Digital clock
(THE CLOCK MUST BE SET BEFORE OVEN
WILL OPERATE)
Clock numbers show hours (0-24) and minutes. -------
Upon immediate hooking up of the oven or after a blackout, three
zeros will flash on the programmer panel.
To set the hour it is necessary to first push and release the .
button. Then using the “+” or “-” button set the correct time of
the day.
When the actual time is inserted, release the buttons in order to
make function the clock.
Manual cooking without using the programmer
To use manually the oven, that is, without the auxiliary
programmer, it is necessary to cancel the flashing «A» by
pushing the button.
If the «A» message is displayed in permanent mode, indicating
that the oven is programmed, it is impossible to set the timer to
manual function and therefore the oven cannot be switched on. In
this case the program must be firstly cancelled by pressing ,
then the manual function can be set. You can now select the
required cooking function and temperature.
Timer
The timer can be used to measure a time period between 1 minute
and 23 hours & 59 minutes.
13
To Next Page
Loading...
