33
Installing the decorative plinth
o A decorative cover for the base of the appliance can be installed
if you wish however it is not essential. The plinth is for
decorative purposes only and will not affect the refrigerator’s
performance.
o The plinth should be installed using the 3 screws as shown in the
diagram below:
Troubleshooting
IMPORTANT: If your fridge freezer appears not to be
operating properly, before contacting the Baumatic
Customer Care Department, please refer to the
checklist below.
My fridge freezer does not appear to be working/there
is no power to my appliance.
o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
hasn’t been a power cut or that the fuse hasn’t blown).
o Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
To Next Page
Loading...
