28
Built-under installation
Positioning the appliance
o Do not install your oven too close to a fridge or boiler.
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the above diagram.
o The oven must be fitted into the aperture using the support
guides supplied.
o Ensure that the rear panel of the furniture unit has been
removed.
o The side panels of the kitchen unit(s) must be full length and go
all the way down to the floor.
o If your kitchen units are on legs, then you must fit full length
side panels to the side of the units that the support brackets will
screw into, before commencing the installation process.
To Next Page
Loading...