29
Ventilation requirements
o Ensure that the aperture that you will be fitting the oven into is
of the size given in the diagram. This will provide a gap at the
back of the oven to allow air to circulate as shown in the drawing
on the previous page.
o There should also be a small gap between the top of the oven
and the bottom of the work surface which the oven is built
under.
IMPORTANT: The ventilation requirements shown MUST
be followed; otherwise the oven may not operate
correctly.
My appliance isn’t working correctly
o The oven isn’t coming on.
* Check that you have selected a cooking function and a cooking
temperature.
* Check that the automatic cooking symbol (10) isn’t lit on the
LED display.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
o The grill function works but the main oven does not.
* Check that you have selected the correct cooking function.
o The grill and top oven element is not working, or cuts out
for long periods of time during use.
* Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
o My food is not cooking properly.
* Ensure that you are selecting the correct temperature and the
correct cooking function for the food that you are cooking. It
To Next Page
Loading...