Using the hob top
Hob surface layout
1) 3.80 kW triple crown (wok) burner
2) 3.00 kW rapid burner
3) 1.80 kW semi-rapid burner
4) 1.00 kW auxiliary burner
Before first use
IMPORTANT: You should clean the hob surface
(see “Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
13
To Next Page
Loading...
