Replacing the oven bulb
IMPORTANT: The oven must be disconnected from your
mains supply before you attempt to either remove or
replace the oven bulb.
o Draw out the side guide rails in order to provide access to the
bulb.
Flat lamps
o Remove the glass protection cap (C) from the bulb socket by
lifting it with a screwdriver placed between the cap and the oven
wall.
o Replace the bulb (B) with a 15 W/300°C, screw type pygmy.
o Do not use any other type of bulb.
o Screw the lamp cover back into its original position.
Round lamps
o Turn the glass protection cap (A) anti-clockwise and change the
lamp (B).
o Refit the cap by screwing it back in a clockwise direction.
28
To Next Page
Loading...
