Using the hob top
Hob surface layout
A) 1.20 kW hyper-speed zone (Ø 140 mm)
B) 2.10 kW hyper-speed zone (Ø 210 mm)
C) 1.00 / 2.20 kW double hyper-speed zone (Ø 140 / 210 mm)
D) 0.80 / 2.20 kW oval hyper-speed zone (Ø 170 / 265 mm)
Before first use
IMPORTANT: You should clean the hob surface
(see “Cleaning and maintenance” section).
o You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o Do not burn off more than one zone at once.
o You must place a saucepan filled half full with cold water on
each zone as you burn it off.
13
To Next Page
Loading...
