o The maximum weight of the furniture door should be 5.5
kilograms. The maximum thickness of the furniture door
should be 15 mm.
o Use the installation template supplied with the appliance to mark
up and then drill out the necessary holes in the furniture door.
o Attach the
upper hooks
onto the
furniture
door.
o Attach the
lower hooks
onto the
furniture
door.
o Lift the furniture door towards the dishwasher door, ensuring
that the upper and lower hooks locate into the slots on the
outside of the dishwasher door.
o Push the furniture door downwards so it locks into place on the
dishwasher door.
o Open the dishwasher
door and find the
covers that are
located on either
side of the outer
edge.
o Fully tighten the
screws into the
holes. Make sure
that you screw them
tightly into the
furniture door.
o Replace the covers.
33
To Next Page
Loading...
