23
Hand wash program
o Put the laundry into the drum and then close the door. The
maximum wash load size is 1 kg for the Hand wash program.
You should only use the Hand wash program for garments that
have hand wash marked on their wash care label.
o In the detergent drawer, put detergent into the main wash
compartment.
o Softener should be poured into the middle compartment of the
detergent drawer; the level should be below the ‘MAX’ level.
o If you want to use bleach, then you should put it into the main
wash compartment with your detergent.
• Press the power button, the LCD display will show “---“ and all
the program lights will come on.
• Use the wash program selection knob to select the Hand wash
program.
• A wash temperature of COLD, with a 400 rpm spin and 3 rinses
will be selected automatically by the appliance.
• You can use the TEMP button to adjust the wash temperature;
COLD and 30°C wash temperatures are available.
• You can use the SPIN button to adjust the spin speed. 1400 and
1000 rpm spin speeds are not available with the Hand wash
program.
• You can use the OPTION button to select Rinse+ and Crease
Care wash cycle options. Continue to press the OPTION button
until the wash cycle option or combination of options that you
want are lit on the LCD display.
* Press the Start/Pause button, the door will lock (confirmed by
the indicator on the LCD display) and after a few seconds you
will hear the machine start to fill with water.
To Next Page
Loading...
