24
Quick 30 program
o Put the laundry into the drum and then close the door. The
maximum wash load size is 1 kg for the Quick 30 wash program.
o In the detergent drawer, put detergent into the main wash
compartment.
o Softener should be poured into the middle compartment of the
detergent drawer; the level should be below the ‘MAX’ level.
o If you want to use bleach, then you should put it into the main
wash compartment with your detergent.
• Press the power button, the LCD display will show “---“ and all
the program lights will come on.
• Use the wash program selection knob to select the Quick 30
program.
• A wash temperature of 30°C, with an 800 rpm spin and 2 rinses
will be selected automatically by the appliance.
• You can use the TEMP button to adjust the wash temperature;
COLD, 30°C and 40°C wash temperatures are available.
• You can use the OPTION button to select Rinse+ and Crease
Care wash cycle options. Continue to press the OPTION button
until the wash cycle option or combination of options that you
want are lit on the LCD display.
* Press the Start/Pause button, the door will lock (confirmed by
the indicator on the LCD display) and after a few seconds you
will hear the machine start to fill with water.
Spin only
o Put the laundry into the drum and then close the door.
• Press the power button, the LCD display will show “---“ and all
the program lights will come on.
• Select the spin speed that you require by pressing the SPIN
button.
* Press the Start/Pause button, the door will lock (confirmed by
the indicator on the LCD display) and after a few seconds you
will hear the machine start to spin.
To Next Page
Loading...
