Auto cooking function 2
This cooking function is suitable for cooking approximately 500 grams
of potatoes (in water).
o Use the door button (5) to open the door of
the microwave.
o Check that the rotating plate and rotating
base are correctly assembled in the cavity.
o Place the potatoes and water in a heat
resistant container and then place it in the
centre of the microwave cavity and then
close the microwave door.
o IMPORTANT: You should make sure that the
door of the microwave is shut securely.
o Turn the function selector dial to the auto
cooking function 2 symbol .
o Press the start button (G) and your microwave will start to cook.
o At the end of the cooking time, your microwave will give an
audible signal and the LED display will show the word “END”.
Safety lock
o When the microwave is not heating, it is possible to switch on
the safety lock.
o Press and hold down the safety lock button (C) for 3 seconds.
o The LED display (A) will show 4 horizontal bars and flashing
decimal points.
o Until the safety lock is switched off, all buttons on the microwave
will be disabled.
o To switch off the safety lock, press and hold down the safety lock
button for 3 seconds. The LED display will return to showing the
time of day.
20
To Next Page
Loading...
