o You should feed the electrical cable through the hole that you
have made for it in the housing unit. You should NOT connect
the cable to the spur outlet at this stage.
o Place the microwave into the housing unit. IMPORTANT: Please
note the 370 mm housing unit measurement for installation type
C.
o If required, make an adjustment
to the height of the microwave
using the adjustable feet.
o IMPORTANT: Make sure that the microwave is properly levelled
off in the housing unit.
o Using the screws provided,
screw through the corners of
the microwave into the housing
unit (as shown in the diagram
opposite).
32
To Next Page
Loading...
