31
Installing the oven into the housing unit
o IMPORTANT: Before installing the appliance into the housing
unit, YOU MUST attach the “drip catcher” to the lower front edge
of the oven using the 3 screws supplied. The above line drawing
shows how you attach the “drip catcher”.
o Ensure that the oven has been securely fixed into the housing
unit. The fixing of the oven into the housing is made by using
four screws and caps, which are supplied with the oven.
o Open the door of the oven and then screw through the four holes
on the edge of the oven cabinet into the housing unit.
To Next Page
Loading...
