21
perture dimensions
aperture size that you will need to be
ble to install your appliance.
ss in
the floor.
djusting the plinth/kickboard
to attach a plinth or kickboard to match your existing kitchen
nits.
s on each side of the grid and then pull the grid towards
you.
A
The diagram below shows the
a
o The appliance must be stood on a level floor. You can use the
levelling feet to take into account any minor unevenne
A
When the appliance has been placed underneath the worktop, you may
decide
u
o Remove the grid on the base of the appliance by unscrewing the
screw
To Next Page
Loading...
