24
o Place the mounting bracket (1) on the reverse of the furniture
te the position of the
mounting bracket in the above drawing, to ensure that you have
top of the furniture door. This
will allow you a 5 mm gap from the top of the furniture door, to
racket to the furniture door using the screws
provided and a Phillips-head screwdriver. These screws should
door.
o The middle of the mounting bracket should be positioned on the
line that you have just drawn. Please no
the mounting bracket the correct way up.
o The top of the mounting bracket should be positioned
approximately 15 mm from the
the underneath of your worktop.
o Fix the mounting b
be fully tightened.
To Next Page
Loading...
