26
f) Open the appliance door.
o Use a suitably sized drill bit to drill through the holes in the
o Secure the bracket to the underside of the worktop, using the
ts provided to secure the fridge to the side
of the cabinet. Use a suitably sized drill bit to drill through the
o The oval holes rest over the hinge positions which are not being
used o
bracke
heck that the door opens and shuts without snagging, as
ell as checking that the door is sealing correctly.
bracket, into the work top. IMPORTANT: The drill bit should be
appropriate for the material that your work top is made from.
screws provided. IMPORTANT: These screws should be fully
tightened.
o If the appliance is being installed under a granite worktop, use
the L shaped bracke
three holes in the bracket into the cabinet side on the opposite
side to the hinges.
n the front of the appliance. Use two screws to secure the
t to the front of the appliance.
C
w
To Next Page
Loading...
