20
5) Cut the sealing strip so that is the
same height as the height of the aperture.
o Stick the sealing strip onto the
side of the aperture that the
appliance door will open from.
o Carefully lift the appliance and
place it into the aperture of the
kitchen unit that you are
installing it into.
o Slide the appliance over to the far
left of the aperture, unless you
have reversed the door. In which
case you should slide the
appliance over to the far right of
the aperture.
6) Align the front feet of the appliance, with the front edge of the
kitchen unit.
Fix the front feet into position using the Ø4 x 17 fixing screws (e).
To Next Page
Loading...
