19
Supplied installation components
a) Top fixing bar
b) Sealing strip
c) Door slider
d) Door guide
e) Fixing screws (Ø4 x 17)
f) Fixing screws (Ø4.2 x 9.5)
Installing your refrigerator
If you need the appliance door to open from the
other side, then please reverse the door before
commencing the installation process. (See Reversing
the door section).
4) Insert the top fixing bar
(a) into the slot on the top
of the appliance. Use the
Ø4.2 x 9.5 fixing screws (f)
to fit the fixing bar to the
top of the appliance.
o Pass the power
cable through to
the back of the
aperture. This will
allow the
appliance to be
easily plugged in,
once you have
completed the rest
of the installation.
To Next Page
Loading...
