5) Cut the sealing strip so that is the
same height as the height of the
aperture.
o Stick the sealing strip onto
the side of the aperture that
the appliance door will open
from.
o Carefully lift the appliance
and place it into the
aperture of the kitchen unit
that you are installing it
into.
o Slide the appliance over to
the far left of the aperture,
unless you have reversed
the door. In which case you should slide the appliance over to
the far right of the aperture.
6) Align the front feet of the appliance, with the front edge of the
kitchen unit.
Fix the front feet into position using the Ø4 x 17 fixing screws (e).
To Next Page
Loading...
