21
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
THE GUARANTEE FREE OF CHARGE.
Aperture dimensions
a) The diagram opposite shows
the aperture size that you will
need to be able to install your
appliance.
o The appliance must be stood on a level floor. You can use the
levelling feet to take into account any minor unevenness in
the floor.
Adjusting the plinth/kickboard
When the appliance has been placed underneath the worktop, you may
decide to attach a plinth or kickboard to match your existing kitchen
units.
o Remove the grid on the base of the appliance by unscrewing the
screws on each side of the grid and then pull the grid towards
you.
To Next Page
Loading...
