26
o If the appliance is being installed under a granite worktop, use
the L shaped brackets provided to secure the fridge to the side
of the cabinet. Use a suitably sized drill bit to drill through the
three holes in the bracket into the cabinet side on the opposite
side to the hinges.
o The oval holes rest over the hinge positions which are not being
used on the front of the appliance. Use two screws to secure the
bracket to the front of the appliance.
Check that the door opens and shuts without snagging, as
well as checking that the door is sealing correctly.
Troubleshooting
IMPORTANT: If your freezer appears not to be
operating properly, before contacting the Customer
Care Department, please refer to the checklist
below.
My freezer does not appear to be working/there is no
power to my appliance.
o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
hasn’t been a power cut or that the fuse hasn’t blown).
o Check that the thermostat inside the appliance has not been
turned to the <0> position.
o Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My freezer appears to be performing poorly
o Check that the appliance isn’t overloaded and that food hasn’t
been packed too tightly into it.
o The thermostat setting is too low; you should turn the
thermostat up higher.
o Ensure that the door is closing properly and that the door has
not been opened for a prolonged period in error.
o Ensure that there is adequate ventilation for your appliance.
To Next Page
Loading...
