j) Install the slider guides on the
edge of the appliance doors
(there are 2 slider guides per
door).
o Insert the sliders into the
slider guides.
o Mark the distance from the
front edge of the furniture
door, to the edge of the slider.
This measurement should be
approximately 20 mm.
o Fix the sliders into position; the screws must be fully tightened.
k) Check that both furniture doors
open and close properly,
without fouling on the kitchen
cabinet.
o You should also ensure that the
doors of the appliance and the
door seals are shutting properly
against the cabinet of the fridge
freezer.
o Installation completed.
To Next Page
Loading...
